But prices are slowly returning to their previous levels, and hard disks are affordable again. If the cable has only the one connector on it for the optical drive, then you could get a two-drive cable and hook your HD on there. Also make sure that you did not insert the cable upside down. I think it is because the 160 is from a compaq Presario XP and my computer is HP a305w I might just a will take it to someone else for installing
Either SATA or ATA. BEWARE the shop or person who sells to your wallet instead of your needs. Once seated in the drive cage, use the screws that came with the drive to secure it – you will need to align the holes on the drive with the holes Im using another laptop to do so that i solved how do i add another hard drive ?? http://www.sevenforums.com/hardware-devices/297329-how-do-i-add-another-sata-hdd-only-got-room-2-a.html
If you're looking to install applications (i.e.; Games), then you will want to go with the Internal option, since some applications may load drivers when you startup your PC. You may want to purchase additional hard drive cooling fans. 2. AskBob Updates: Boost your Internet IQ & solve computer problems. The only thing to be aware of is that the power supply and cables are different. (as pictured in the article) They will only go in one way though as the
Was this answer helpful? How To Install A Second Hard Drive Windows 10 Put the ATA cable on each drive, plug in the power, and boot up. Dittos by zepper / May 12, 2006 4:30 AM PDT In reply to: Old hard drive Wish folks would check their facts before posting - makes 'em look like a maroon Stand up for your right to repair.
Those controllers generally work OK, but usually require OS drivers which can become a problem if you want to update or change your OS in the future and buy a no-name How To Configure A Second Hard Drive And if so, when I turn on my PC, will start from external USB memory disk? Partition Magic (now sold & "maintained" by Symantec) used to come with a little utility called "Magic Mover" that could successfully move many "clean" apps to other drives letters w/o a Now the the HD is failing in the new PC so i want to backup all the data from the failing HD by connecting them.
Preview post Submit post Cancel post You are reporting the following post: 5/12/06 Adding old hard drive to new PC with only SATA connections This post has been flagged and will http://www.pcadvisor.co.uk/how-to/desktop-pc/install-extra-hard-disk-in-your-pc-3374817/ I want to get a 1TB Hard drive for my games and perhaps a SSD for OS and other programs. How To Connect Two Sata Hard Disk In One Pc The storage capacity of the Hard drives of yesteryear were measured in megabytes, and one megabyte (MB) is about one million characters. How To Install A Second Hard Drive Windows 7 Step 3 Push the drive into the bay through the front of the computer... ...and press the drive all the way in.
XP Pro does. Some disks just don't seem to cable select properly. Go to the next section to install a drive into the drive cage. Tell them that you believe repair should be fair, affordable, and accessible. How To Install A Second Sata Hard Drive
Issues such as cooling and additional power drain could bring on unexpected problems. Most Windows programs will have problems running from the old drive because the settings for the programs need to be in the boot drive's "database" (Registry) to run properly. This means that there will be at least one EIDE interface on the motherboard, and a ribbon coming out of it and going to the cd device. So mounting it may be a challenge if your new computer has a case with tight-fitting drive bays.
Most tower cases can have their sides removed with just two screws. Second Hard Drive Not Showing Step 2 Squeeze tightly on the sides of the USB connector on the back of the drive bay and detach the connector. Both disks basically used for backup purposes (for the time being).
shipped. How Do I Add Another SATA Hard Drive? use the total usable HDD space as one drive) key: here drive=partition 5. How To Connect External Hard Disk To Pc pinpoint where (in which HDD) you have installed the operating system – so that the BOOTMGR could be loaded to log in to windows as usual; otherwise you’ll have to face
Flag Permalink This was helpful (0) Collapse - XP Pro by 70441.2227 / May 15, 2006 4:06 AM PDT In reply to: That isn't the topic, but... Most ribbon cables have 2 attachments - your main drive should be attached to the master attachment. If you need extra storage for media, get a NAS or a decent external drive. Reply Morerubbish2 January 21, 2011 at 9:04 pm Have a look on ebay for hard drives both ide and sata, both still fairly easily available and installation of an ide drive
All you need is to purchase an external drive enclosure that accepts whichever HD cable or ribbon was used to connect to your old PC. If you don't have a spare one, you could use a splitter off the optical drive. Most times, it?ll be automatically recognized. Thanks Flag Permalink This was helpful (0) Collapse - XP Pro by jdeere_man / May 14, 2006 1:25 PM PDT In reply to: XP Pro Really the only reason one would
I also have a old hard drive as well it worked as a second hard drive well but i cant see my it in my computer any more?